Thursday, December 30, 2010

Significant 2011 NEC Code Changes Part II

Significant 2011 NEC Code Changes Part II

Chapter 2, 2011 NEC

"Article 200.1, Scope,"

Informational Note Changed:

"Grounding Conductor" has been changed to "Equipment Grounding Conductor (the EGC) and "Grounding Electrode conductor (the GEC)" was added. This more accurately reflects Article 100's defined terms.

"Article 200.2 "General,"

Wording/Section Changed:

Previously there were 10 specific code sections listed for systems that prohibited or exempted the installation of grounded (neutral) conductors. Now the wording is changed to "systems SPECIFICALLY exempted or prohibited by OTHER SECTIONS of this Code."

"Article 200.2(B), Continuity,"

Informational Note Added:

Section B was a 2008 NEC edition code change that prohibited using a metal enclosure as a connection pathway for the continuity of the grounded conductor (neutral). For the 2011 edition, an informational note was added, linking this section to the device rule in Article 300.13(B), "Device Removal." That article prohibits the use of a device or lampholder as a continuity pathway for the grounded conductor in a multiwire branch circuit (the "pigtail" rule).

"Article 200.4, Neutral Conductors,"

New Section Added:

Wording has been added that restricts the sharing of a neutral conductor by more than one set of feeders or one multiwire branch circuit. It does allow an exception if another are of the Code specifically allows for neutral sharing as is the case in Article 215.4(A) "Feeders With Common Neutral Conductor."

"Article 200.6(A) Means of Identifying Grounded Conductors, Sized 6 AWG or Smaller,"

Section is Changed:

The new outline greatly simplifies and makes this section easier to read. Essentially the basic rules are no longer in their former paragraph format. They are now bulleted into the existing numbered list, increasing the previous edition's list from 4 items to 8 items.

"Article 200.6(D) Grounded Conductors of Different Systems,"

New Paragraph Added:

A new directive has been added that now requires a placard or some sort of permanent type documentation to be installed at the origination point (panel) where different grounded conductors from various services are installed. This documentation shall list the color/identification scheme employed in the installation. An example of this was shown as an Exhibit (200.3) in the 2008 NEC Handbook, and is now a requirement. This helps the technician readily and easily trace different system's neutrals safely and quickly. Note that there was already and existing requirement for the Phase Coloring Scheme in 210.5(C).

"Article 200.7(C), (the so-called "Neutral as a Switch Leg" rule)

Article is Changed:

Wording has been added that clarifies and specifically allows the use of colored tape when re-identifying a white or grey colored insulation for the use as an ungrounded (hot) conductor.

Paragraph #(2) has been deleted and it's intent has become the formerly numbered section (3). It formerly contained the rule that allows for the use of the white colored conductor in a cable assembly (such as in a "romex" cable) as a switch leg in single, 3-way, or 4-way switching. This wording is now deleted. In it's place is the rule allowing the use of the white or grey conductor in a flexible cord (such as an SO or Appliance cord) as an ungrounded (hot) conductor.

"Article 210.4(B) Multiwire Branch Circuits, Disconnecting Means,"

Informational Note Added:

The new informational note adds a reference to Article 240.15(B) "Circuit Breaker as an Overcurrent Device" to tie the two articles together. 210.4(B) requires a simultaneous disconnecting means for all ungrounded conductors. 240.15(B)(1) allows the use of an OCPD for multiwire branch circuits; with identified handle-ties in order to operate ALL poles of the circuit simultaneously.

"Article 210.4(D) Grouping"

Article is Changed:

New wording extends the grouping rule that was new for the 2008 Code. Previously a wire tie (or similar means) was required in panels to show the 'grouping' of multiwire branch conductors. The new rule is to extend this requirement out to each junction box or anywhere that splices or connections are made in the entire circuit. Note that the rule excluding cable assemblies (such as MC Cable or NMC, "Romex") and individual dedicated conduits has not been changed.

 

These keywords may have brought you here: journeyman exam prep, master electrician exam prep, exam preparation, electrical exams, journeyman exam preparation, master electrician exam preparation, mike holt courses, prepare for journeyman exam, prepare for master electrician exam, electrical exam courses

23 comments:

  1. In the event that you will gain a graduate degree online in your picked point https://slashdot.org/journal/2779957/education-essay-writing-service-is-truly-an-amazing-service-provider you should have a four year certification in an applicable subject or a propelled degree from the college are perceived.

    ReplyDelete
  2. While equipment faults are inevitable, how the system responds is critical as far as safety is concerned. Most electrical safety issues or risks arise due to equipment or wiring faults and malpractices. Electrical contractor ct

    ReplyDelete
  3. When you need an electrician, it can be a pretty daunting task finding the right one for the job. You should look for South Jersey Electrician Here are some ways to find a good one to do your important wiring work.

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. My brother is thinking about becoming an electrician. I told him he should talk to some Electrician’s guide in using Solar Powered Holiday Décor

    ReplyDelete
  7. Your utilization of organizing when mentioning your focuses makes your objective facts clear and straightforward. Much thanks to you.
    Prescott Electrical Repair

    ReplyDelete
  8. Such a nice blog. I would be thankful if you share more information about
    electrician

    ReplyDelete
  9. Truly decent and intriguing post. Continue posting. Much obliged for sharing.
    vert shock download

    ReplyDelete
  10. Your post is awesome. You have shared very valuable information to us. Thank you so much for sharing this.
    Electrician in Islamabad

    ReplyDelete
  11. I was reading some of your content on this website and I conceive this internet site is really informative ! Keep on putting up. cfa level 1 pdf

    ReplyDelete
  12. Positive site, where did u come up with the information on this posting? I'm pleased I discovered it though, ill be checking back soon to find out what additional posts you include. Emergency Electricians

    ReplyDelete
  13. I got too much interesting stuff on your blog. I guess I am not the only one having all the enjoyment here! Keep up the good work. Plumbing Drain Pipe

    ReplyDelete
  14. Today, the technology is becoming advanced day by day. Those gadgets and electronic devices that were considered impossible a few years ago, have become reality in today's world. Most of the people are now talking about wholesale products. You can buy almost all kind of wholesale electronics like gadgets, home appliances, devices and much more. There is no doubt that you can buy any product in wholesale but the electronics are more popular in this category. Electrician Watford

    ReplyDelete
  15. I am lucky that I found this web blog, precisely the right information that I was searching for! suadiennuoctainha

    ReplyDelete
  16. Not often do I encounter a weblog that is both educated and entertaining, and let me tell you, you may have hit the nail on the head. Your concept is excellent; the issue is something that not sufficient individuals are speaking intelligently about. I am very happy that I stumbled across this in my quest for something relating to this. hut be phot tai nha

    ReplyDelete
  17. Great post, you have pointed out some excellent points, I as well believe this is a very superb website. Électricien Sherbrooke, QC

    ReplyDelete
  18. I visit your blog regularly and recommend it to all of those who wanted to enhance their knowledge with ease. The style of writing is excellent and also the content is top-notch. Thanks for that shrewdness you provide the readers! electrician marketing

    ReplyDelete
  19. Really great post, you always share something unique with us and it is always useful for us..!!
    Electrician Greenacre

    ReplyDelete
  20. They recommend that any home that is over 40 years old, has had major renovation or major appliances added over 10 years ago or is changing owners receive an electrical inspection. EICR

    ReplyDelete

Popular Posts